The Wiring

Fuse Box to Panel

I said earlier on The Panel blog that I was using the air con duct for going up from the fusebox to the panel.

First lot of wiring done last week

One spare switch for future use if need be

Now I had done all the wiring that was going up to it, I had to make sure it was all working and then tidy it up with cable ties.

Labels added to I know what each circuit is

So the wires go along from the panel, and down the ducting just behind the drivers seat.

Then come out at the bottom and then run along to the fusebox, using a few cable ties to make it neat.

I also ran a spare + and - cable up from the fusebox and along past the panel to the just behind the passenger seat. This will be used for a TV to be added at a later date.

And then I put the duct covering back on and the board the panel is mounted on.

Quick final check to make sure they were working, thankfully they all do... job done!

Link to Photo Album