Next up was to wire up the shower light/fan as I could run the cables along the same way the LED's were along the aircon duct.
So first I joined the cables from the unit with a terminal block and ran the wires right along the duct.
Then again, wiring it up to a switch on the control panel and running more wires from the fusebox. .
I could have ran a thicker cable up from there to start with, but I preferred to keep most things on individual fused circuits
So with it all wired in, again a quick test and this worked fine. The fan seems pretty decent and powerful and can feel the air coming out from the vent outside.
No comments:
Post a Comment