The Trim 4

Kitchen Finish

Today I removed the side panels off the kitchen unit to check all the gas connections. I got gas leak detector spray plus some PTFE tape to put on the compression joints.

Once I had checked all the connections, I put the panels back on and then put some aluminium trim to finish off the edges.

I also moved the 240V socket on to the side panel as you can see on the photos below

All the above were just stuck on with adhesive, if they don't hold well I will put a couple of screws in.

Update 21/04/15

Added a couple of bits on to the kitchen cupboard today, along with the awesome licence plate that Dave Dale gave me last month when I was in Austin, Texas... this actually came from his truck :)

Link to Photo Album