I decided to use Veltrim to cover up the walls etc, this was from Harrisons and came with the spray adhesive.
I started with the ply panels I had done a few weeks ago, took them off and brought them inside to do in the warmth!
These were fairly straight forward to do, I'll probably put some edging trim along the edges too so thart it looks a better finish.
Then I done the partition wall, obviously due to the profile of the van it was easier just to roughly cut the shape required.
Once the glue had done its magic, I could then trim off the excess and make it as neat as possible.
With that large section done, I just did the other side in the same way and then the small part above too.
Obviously I will still be putting a trim round the doorway into the wetroom as well.
Then I did the side of the wardrobe, and also decided to do the top of it, even though I am planning on building a couple of drawers above there.
That's all I've done for now, still got plenty left over to do the outside of the overhead lockers when I have done them too.
No comments:
Post a Comment