Well I had to remove a metal frame that was used to support one of the seat tracks over the wheel-arch on the drivers side.
I stripped the wood off it, and found it was welded to the floor.. oh well it was either saw it off or get an angle grinder and attack it with that!
So that's what I did, off I went to B&Q to purchase one and I thought I was never going to get through the metal.. it took a good while to even make a dent in the 4 posts due to the awkward position and trying not to set fire to the van!
Eventually, and without burning anything I managed to remove the frame and all it needs now is to be grinded down flush with the floor which I will do at a later date.
No comments:
Post a Comment