I had a quick water test today, to see if it was running to the sink tap and shower head. I filled up one of the water containers, and submerged the pump into it.
I got the gas connected to the boiler to see if the hot water worked, but trying to run a tap and check and adjust the boiler controls at the same time is impossible with just myself so will have to try another day when someone can help.
But the quick test that I did do, the cold water was running fine to both shower/sink and the hot water was coming through, although not quite hot enough on the quick test I did... it will need adjusting.
Looks like shower pressure is fine though!
Oh and finish the drainage, hence me not going into the plug holes!
*EDIT*
Managed to get the boiler set correctly, gives out some great power and nice hot water for a shower.. chuffed with that purchase!
Link to Photo Album
No comments:
Post a Comment